Planning the electrical installation 65
Planning the electrical
installation
Contents of this chapter
This chapter contains instructions for planning the electrical installation of the drive,
for example, for checking the compatibility of the motor and drive, selecting cables,
protections and cable routing.
Limitation of liability
The installation must always be designed and made according to applicable local
laws and regulations. The manufacturer does not assume any liability whatsoever for
any installation which breaches the local laws and/or other regulations. Furthermore,
if the recommendations given by the manufacturer are not followed, the drive may
experience problems that the warranty does not cover.
Selecting the supply disconnecting device
Install a hand-operated input disconnecting device between the AC power source
and the drive. The disconnecting device must be of a type that can be locked to the
open position for installation and maintenance work.
To Next Page
Loading...
