ABB ACS580-01 - Checking the Installation Site

44 Mechanical installation
Checking the installation site
The drive must be installed on the wall. There are three alternative ways to install it:
• vertically alone. Do not install the drive upside down.
Frame
size
Vertical installation -
Free space
Above (a) Below (b)
1)
Beside
mm in mm in mm in
R1 200 7.9 30 1.2 150 5.9
R2 200 7.9 30 1.2 150 5.9
R3 200 7.9 200 7.9 200 7.9
R4 53 2.1 200 7.9 150 5.9
R5 100 3.9 200 7.9 150 5.9
R6 155 6.1 300 11.8 150 5.9
R7 155 6.1 300 11.8 150 5.9
R8 155 6.1 300 11.8 150 5.9
R9 200 7.9 300 11.8 150 5.9
3AXD00000586715.xls J
1)
Free space below is measured from the frame, not
from the cable box used in frames R1…R2 and
R5…R9.
a
b
c