ABB ACS580-01 - Reinstalling Side Plates and Covers, Frames R6

Electrical installation 137
 Reinstalling side plates and covers, frames R6…R9
IP21 (UL Type 1)
1. Reinstall the side plates of the cable box. Tighten the retaining screws with a
screwdriver.
2. Slide the cover of the cable box on the module from below until the cover snaps
into place.
3. Reinstall the module cover. Tighten the two retaining screws with a screwdriver.
IP55 (UL Type 12)
1. Reinstall the side plates of the cable box. Tighten the retaining screws with a
screwdriver.
1
2
IP21 (UL Type 1)IP21 (UL Type 1)
3 1
IP55 (UL Type 1)IP21 (UL Type 1)