40 Operation principle and hardware description
Type designation key
The type designation contains information on the specifications and configuration of
the drive. You find the type designation on the type designation label attached to the
drive. The first digits from the left express the basic configuration, for example,
ACS580-01-12A7-4. The optional selections are given after that, separated by plus
signs, for example, +L501. The main selections are described below. Not all
selections are available for all types.
CODE DESCRIPTION
Basic codes
ACS580 Product series
01 When no options are selected: Wall mounted, IP21 (UL Type 1), assistant
control panel with a USB port, choke, EMC C2 filter (internal EMC filter), safe
torque off, braking chopper in frames R1, R2, R3, coated boards, cable lead
through entry from the bottom, cable box or the conduit plate with cable
entries, quick installation and start-up guide (multilingual).
Size
xxxx Refer to the rating table, page 160
Voltage rating
4 400/480 V (380…480 V). See page 183 for further information.
Option codes (plus codes)
Control panel and panel options
J400 ACS-AP-S Assistant control panel (as standard)
J425 ACS-AP-I Assistant control panel
J429 ACS-AP-W Assistant control panel with a bluetooth interface
J404 ACS-BP-S Basic control panel
J424 CDUM-01 Blank control panel cover (no control panel)
I/O (one slot available for I/O options)
L501 CMOD-01 External 24 V AC/DC and digital I/O extension (2×RO and 1×DO)
L523 CMOD-02 External 24 V AC/DC and isolated PTC interface
L537 CPTC-02 ATEX Certified PTC interface and external 24V
L512 CHDI-01 115/230 V Digital input extension (6×DI and 2×RO)
L537 ATEX certified PTC interface and external 24 V. Requires option Q971.
Safety
Q971 ATEX certified safe disconnection function, EX II (2) GD. Sold only with
option L357.
ACS580-01-12A7-4+L501+K457+...
1 2 3 4
To Next Page
Loading...
