Planning the electrical installation 77
The cable type tested and approved by the manufacturer is used in control panel
option kits. Suitable cables are CAT 5e unshielded or shielded twisted pair cables.
Drive composer PC tool cable
Connect the Drive composer PC tool to the drive through the USB port of the control
panel. Use a USB type A (PC) - type B (control panel) cable. The maximum length of
the cable is 3 m (9.8 ft).
FPBA-01 PROFIBUS DP adapter module connectors
Frames R1…R3: The following connector types have been tested to fit in the tight
space for option slot 1.
• Phoenix Contact SUBCON-PLUS-PROFIB/PG/SC2, part number 2708245. Lead
the cable through the control cable hole on the right in the lead-through plate (1).
• Siemens, part number 6GK1 500 0EA02. Lead the cable through the middle
control cable hole in the lead-through plate (2).
To Next Page
Loading...
