Technical data 195
EN 60204-1:2006 + AC:2010 Safety of machinery. Electrical equipment of machines.
Part 1: General requirements. Provisions for compliance:
The final assembler of the machine is responsible for
installing
- emergency-stop device
- supply disconnecting device.
IEC/EN 60529:1992 + A2: 2013 Degrees of protection provided by enclosures (IP code)
EN 61000-3-12:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits -
Limits for harmonic currents produced by equipment
connected to public low-voltage systems with input current
The standard is met with a Rsce (transformer short circuit
ratio) of 350 or higher.
IEC/EN 61800-3:2004 + A1:2012 Adjustable speed electrical power drive systems. Part 3:
EMC requirements and specific test methods
IEC/EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1:
Safety requirements – electrical, thermal and energy
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage
systems. Part 1: Principles, requirements and tests.
UL 508C 3rd edition UL Standard for Safety, Power Conversion Equipment,
second edition
NEMA 250:2008 Enclosures for Electrical Equipment (1000 Volts
Maximum)
To Next Page
Loading...
