Safety instructions
Description
3HEA 800 970-001 Rev. D, Mars 2006 1-5
Specification
2 Safety instructions
2.1 Description
This chapter contains safety instructions for all steps that involve risk of personal
injury or material damage. In addition, they are written out by the instruction for
each step.
General warnings, where the intention is to avoid problems, are only included in the
pertinent instructions.
Symbol
explanations
The different types of warnings are indicated with symbols according to the table
below:
Symbol Name Meaning
Danger Warning that serious or life-threatening personal injury and/or
serious damage to the product will occur if the instructions are
not followed.
Warning Warns of the risk of personal injury or serious damage to the
product. Always follow the instructions that accompany this
symbol.
Electric shock Warns of possible electric shock that can cause life-threatening
or serious personal injury. Always follow the instructions that
accompany this symbol.
Caution Draws your attention to the fact that damage to the product may
occur if an action is not performed or is performed incorrectly.
Static
electricity ESD
The ESD symbol indicates a risk for static electricity that may
cause serious damage to the product.
Note: Information about important parts.
Tip This symbol refers to an instruction providing further information
on a particular step.
To Next Page
Loading...
