Mechanical installation
Geometric adjustment of track motion
2-12 3HEA 800 970-001 Rev. D, Mars 2006
Installation and operation
2.3.5 Geometric adjustment of track motion
Geometric adjustment of track motion can be performed in accordance with three
methods.
Method Description
Method 1 Adjustment of the track motion with a spirit level for adjustment of the
carriage horizontally along the entire travel length.
Method 2 Adjustment of the track motion with position measurement equipment for
adjustment of the carriage horizontally along the entire travel length.
Method 3 Adjustment of the track motion with laser adjustment instrument based on
the available geometric system layout.
Note that the origin of coordinates is located in the manipulator's base zero.
Track coordinate system.tif
Figure 6 Geometric adjustment of track motion
To Next Page
Loading...
