Variants and options
Zone division
1-18 3HEA 800 970-001 Rev. D, Mars 2006
Specification
4.1.4 Zone division
The purpose of the zone division is to divide the conveyor into zones.
It consists of switches that sense when the carriage comes into respective zones, an
aluminium section and brackets for the aluminium section.
Illustration
1 set of switches is used for 2 zones, and 2 sets of switches for 4 zones.
zonindelning pos.wmf
Figure 9 Zone division
Item Description
1 Bracket for aluminium section
2 Aluminium section
3 Switch unit for 4 zones
4 Switch unit for 2 and 4 zones
To Next Page
Loading...
