ABB PickMaster Twin - PowerPac - Page 175

The Edit Controller dialog is opened.
xx1800001713
2 Click on the Select Real Controller icon to open the Select Real Controller
dialog.
Note
User must modify the firewall settings before selecting a real controller in
PickMaster PowerPac.
For WAN port, under Configuration/Communication/Firewall Manager, the
following functions must be enabled.
"syslog" -EnableOnPublicNet
"Bonjour" -EnableOnPublicNet
"RobICI" -EnableOnPublicNet
"EtherNetIP" -EnableOnPublicNet
"RapidSockets" -EnableOnPublicNet
"RobotWebServices" -EnableOnPublicNet
"IEEE1588" -EnableOnPublicNet
"Netscan" -EnableOnPublicNet
"RobAPI" -EnableOnPublicNet
Continues on next page
Application manual - PickMaster® Twin - PowerPac 175
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.1 Switching to real Runtime
Continued