6 Select X1. Point out a location on the x-axis close to the origin with the robot's
TCP.
xx2100000383
7 Press Modify.
xx2100000384
8 Select X2. Move the TCP a distance in the direction the x-axis. Point out a
location on the x-axis with the robot's TCP.
Continues on next page
228 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.6 Calibrating indexed work area
Continued
To Next Page
Loading...
