14 Check if the displayed mean error and max error of the user frame calculation
is acceptable. If the estimated error is acceptable, tap Finish to confirm and
store the new user frame.
xx2100000391
15 Click OK on the popped up dialog.
xx2100000392
16 Enable the Thumb button to motors on the controller.
Continues on next page
230 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.6 Calibrating indexed work area
Continued
To Next Page
Loading...
