ABB PickMaster Twin - PowerPac - Page 304

7 Add the Conveyor WA 1 to the Accept by dragging under the Distribution
Setting tab.
xx1800001732
8 Click OK to close the Recipe setting window.
Ghost picking flow
Note
To run the ghost picking, the work area signals need to be set as predefined
signals.
Use this procedure to run a ghost picking flow:
1 On the PickMaster PowerPac ribbon-tab, click Production.
xx1800001737
Continues on next page
304 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.5 Ghost Picking
Continued