Note/IllustrationAction
xx1900000659
In the Conveyor Workarea window, enter
"LinearWA2" in the Workarea Name text
box.
8
In the Conveyor Board drop down list,
select the correct conveyor board which
has been connected to the liner conveyor.
Tip
The connection between the conveyor
board and the conveyor are defined by
users.
9
In the Conveyor drop down list, select
the "Linear2" conveyor.
10
In the Workarea Type radio box, select
the "Place" option.
11
Click OK to finish the adding of the linear
2 conveyor work area.
12
Adding the item
Note/IllustrationAction
xx1800001429
On the ribbon-tab, click Item under Re-
cipe.
1
xx1900000660
In the Item Type part under Item Proper-
ties, select the Cylinder radio box.
2
In the RH Size part under Item Proper-
ties, define the item’s size as (50, 5).
3
xx1900000485
In the Color part under Item Properties,
define the item's color as RGB
(255,128,128).
4
Continues on next page
314 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued
To Next Page
Loading...
