Note/IllustrationAction
xx1900000658
In the Conveyor Workarea window, enter
"LinearWA1" in the Workarea Name text
box.
2
In the Conveyor Board drop down list,
select the correct conveyor board which
has been connected to the liner conveyor.
Tip
The connection between the conveyor
board and the conveyor are defined by
users.
3
In the Conveyor drop down list, select
the "Linear1" conveyor.
4
In the Workarea Type radio box, select
the "Pick" option.
5
Click OK to finish the adding of the linear
1 conveyor work area.
6
xx1800001417
On the ribbon-tab, click Workarea under
Layout.
7
Continues on next page
Application manual - PickMaster® Twin - PowerPac 313
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued
To Next Page
Loading...
