ABB PickMaster Twin - PowerPac - Page 312

Note/IllustrationAction
xx1900000657
In the Sensor window, enter "Test1" in
the Camera Name text box.
2
In the Camera window, select "Linear1"
in the Attached to Conveyor/Index drop-
down list.
3
Click OK to finish the adding of the
sensor.
4
Adding the work area
Note/IllustrationAction
xx1800001417
On the ribbon-tab, click Workarea under
Layout.
1
Continues on next page
312 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued