ABB PickMaster Twin - PowerPac - Page 311

Note/IllustrationAction
xx1900000656
Click on the Preview button to set the
preference of the conveyor.
11
Enter numbers (3000,400,500) in the LWH
Size(mm) text box to define the size of
the conveyor.
12
In the Conveyor window, enter numbers
(-1000,0,0) in the Position X Y Z (mm)
text box and (0,0,0) in the Orientation
(deg) text boxes to define the location of
the conveyor.
13
Click OK to finish the adding of the con-
veyor.
14
Adding the sensor
Note/IllustrationAction
xx1800001411
On the ribbon-tab, click Sensor under
Layout.
1
Continues on next page
Application manual - PickMaster® Twin - PowerPac 311
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued