ABB PickMaster Twin - PowerPac - Page 310

Note/IllustrationAction
xx1900000653
In the Conveyor window, enter "Linear1"
in the Conveyor Name text box.
2
In the Conveyor window, select the type
as "Linear" in the Conveyor Type drop-
down list.
3
xx1900000654
Click on the Preview button to set the
preference of the conveyor.
4
Enter numbers (3000,400,500) in the LWH
Size(mm) text box to define the size of
the conveyor.
5
In the Conveyor window, enter numbers
(-1000,-400,0) in the Position X Y Z (mm)
text box and (0,0,0) in the Orientation
(deg) text boxes to define the location of
the conveyor.
6
Click OK to finish the adding of the con-
veyor.
7
xx1800000855
On the ribbon-tab, click Conveyor under
Layout.
8
xx1900000655
In the Conveyor window, enter "Linear2"
in the Conveyor Name text box.
9
In the Conveyor window, select the type
as "Linear" in the Conveyor Type drop-
down list.
10
Continues on next page
310 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.1 Example: One pick work area and one place work area
Continued