ABB PickMaster Twin - PowerPac - Page 337

Note/IllustrationAction
xx1900000474
In the Conveyor window, enter "Circular"
in the Conveyor Name text box.
2
In the Conveyor window, select the type
as "Circle" in the Conveyor Type drop-
down list.
3
xx1900000475
Click on the Preview button to set the
preference of the conveyor.
4
Enter numbers (550,500) in the RH
Size(mm) text box to define the size of
the conveyor.
5
In the Conveyor window, enter numbers
(0,700,0) in the Position X Y Z (mm) text
box and (0,0,90) in the Orientation (deg)
text boxes to define the location of the
conveyor.
6
Click OK to finish the adding of the con-
veyor.
7
xx1800000855
On the ribbon-tab, click Conveyor under
Layout.
8
xx1900000476
In the Conveyor window, enter "Linear1"
in the Conveyor Name text box.
9
In the Conveyor window, select the type
as "Linear" in the Conveyor Type drop-
down list.
10
Continues on next page
Application manual - PickMaster® Twin - PowerPac 337
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued