Note/IllustrationAction
xx1900000487
In the Source Type under Item Source,
select the Vision radio box.
13
Click OK to finish the adding of the item.14
Adding the container
Note/IllustrationAction
xx1800001433
On the ribbon-tab, click Container under
Recipe.
1
xx1900000491
Use the default settings in the Container
Properties.
2
xx1900000492
Click on the Container Pattern tab.3
Click Add layer.4
Continues on next page
Application manual - PickMaster® Twin - PowerPac 343
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
