Note/IllustrationAction
xx1900000509
Click on the Add Place Operation button
to add one more place operation.
6
xx1900000510
Click on the Pick Operation1 to open the
setting window for the pick operation.
7
In the Select Flow under Main Setting,
select Flow1 in the drop down list.
8
Click to select the Item Discard checkbox
under Main Setting.
9
In the Source Type under Detection
Setting, select the Vision radio box.
10
xx1900000511
Click to select the Test1 in Available
Camera.
11
Click to select the CircularWA in Avail-
able Workareas.
12
xx1900000512
In the Distribution tab under Distribution
Setting, click on Item1 in the Available
Items and drag CircularWA from the
Available distributors list to the Distribu-
tion Accept list.
13
Continues on next page
Application manual - PickMaster® Twin - PowerPac 349
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
