ABB PickMaster Twin - PowerPac - Page 350

Note/IllustrationAction
xx1900000513
In the Distribution tab under Distribution
Setting, click on Item2 in the Available
Items and drag CircularWA from the
Available distributors list to the Distribu-
tion Accept list.
14
xx1900000514
Click on the Place Operation1 to open
the setting window for the place operation
1.
15
In the Source Type under Detection
Setting, select the Predefined radio box.
16
Click to select the PContainer1 in Avail-
able Objects.
17
Click to select the LinearWA1 in Avail-
able Workareas.
18
xx1900000515
In the Trigger/Filter Setting tab, click to
select the Distance radio button.
19
In the Trigger/Filter Setting tab, define
the Trigger Distance as 300 mm.
20
xx1900000516
In the Distribution tab under Distribution
Setting, click on Item1 in the Available
Items and drag LinearWA1 from the
Available distributors list to the Distribu-
tion Accept list.
21
Continues on next page
350 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued