Note/IllustrationAction
xx1900000525
Select the Customized Settings in the
Signal Type tab.
8
Enter the required data into the I/O signal
setting table.
9
Click OK to close the Recipe setting
window.
10
xx1900000526
Right-click on one LinearWA2 in the tree
view Cell and select Setting.
11
xx1900000527
Select the Customized Settings in the
Signal Type tab.
12
Enter the required data into the I/O signal
setting table.
13
Click OK to close the Recipe setting
window.
14
xx1900000528
Right-click the Test1 in the tree view
Sensor and select Configuration.
15
Continues on next page
Application manual - PickMaster® Twin - PowerPac 353
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
