Note/IllustrationAction
xx1900000522
Right-click on one CircularWA in the tree
view Cell and select Setting.
3
xx1800001735
Select the Customized Settings in the
Signal Type tab.
4
xx1900000523
Enter the required data into the I/O signal
setting table.
5
Click OK to close the Recipe setting
window.
6
xx1900000524
Right-click on one LinearWA1 in the tree
view Cell and select Setting.
7
Continues on next page
352 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
