ABB PickMaster Twin - PowerPac User Manual

3 In the I/O sensor window, enter numbers in the I/O sensor Height text box
to define the height of the I/O sensor according to your requirements or use
default settings.
4 In the I/O sensor window, enter numbers in the I/O sensor Length text box
to define the length of the I/O sensor according to your requirements or use
default settings.
5 In the I/O sensor window, choose a conveyor in the Attached to
Conveyor/Index box to define which conveyor the new camera is attached
to according to your requirements.
6 Click OK.
92 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.5 Adding Sensor
Continued

ABB PickMaster Twin - PowerPac Specifications

General

Brand	ABB
Model	PickMaster Twin - PowerPac
Category	Robotics
Language	English