Adixen ASM GRAPH D+ - D 200 - Maintenance message

D 200
GB 02477 -
Edition
02 -
June
08
Maintenance message
Definition
Adjustment of the
counters
The Maintenance messages will be display on the LCD in order
to inform the operator to do the maintenances.
The operator should adjust the periodicity of the appearance of
this message.
These messages concern (according to the leak detector model):
-
The primary pump
-
The high vacuum pump
-
The roughing pump
-
The periodicity of maintenance (cycles).
All models
ASM 142 / 182 T / 192 T / 1002
ASM 122 D / 142 D / Graph D+ / 182 TD+ / 192 TD+
ASM 192 T2
ASM 192 T2D+
NEXT
Primary pump
adjustment
(*)
NEXT
High vac pump
adjustment
(*)
NEXT
NEXT
Rough. ATP pump
adjustment
(*)
Roughing pump
adjustment
(*)
NEXT
2 x
NEXT
Rough. MDP pump
adjustment
(*)
Maintenance
required adjustment
(*)
(*)
… pump adjustment
or
=
Maint. required adjustment
Reset
Initial value
Adjustment
C 110
1/ 1