Adixen ASM GRAPH D+ - General contents; Chapter A INTRODUCTION

M
anual reference
: 107817
e dition : 07 - March 2009
Software version:
ASM 142 / A S M G R A P H :
L 0088 v3.1 r .02
ASM 142 D / A S M G R A P H D /
ASM G R A P H D+: L 0114 v3.1 r .02
General contents
ASM 142 - ASM 142 D
ASM GRAPH - ASM GRAPH
D
ASM GRAPH D+
User ’ s Manual
GB 00205 -
Edition
07 - March 09
Preliminary
remarks
Throughout this User’s Manual, you could find this type of message
“Summary of screen C 140”: it refers to a specific chapter of the
User’s Manual. Please read it for further information.
Chapter A INTRODUCTION
A 100 - Introduction to the ASM 142 series
A 200
- ASM 142 - Detector operating principle
A 201
- ASM 142 D - Detector operating principle
A 202
- ASM 142 Graph D+ - Detector operating principle
A 300
- Analyzer cell operating principle
A 400
- Testing methods
A 401
- About Helium and Hydrogen
A 500
- Operator interface: control panel
A 600
- Options
A 700
- Accessories
A 800
- ASM 142 - T echnical characteristics
A 801
- ASM 142 D - ASM Graph D+ - T echnical characteristics
A 900
- Dimensions
A 901
- Dimensions ASM Graph D+
Chapter B INSTALLA TION
B 100 - Safety instructions
B 110 - Unpacking - Storage - T ransportation
B 200 - Neutral gas purge and inlet vent connection
B 201 - Neutral gas purge installation (accessory)
B 210 - Connecting the detector to the installation
B 211 - Connecting the detector to the installation: ASM graph D+
B 300 - Controlling the detector with the I/O interface
B 310 - Controlling the detector with a PC computer through the RS 232 interface
B 320 - Connecting the detector directly to a printer or another device
B 400 - Before starting up the leak detector
Chapter C OPERA TION
C 100 - Factory configuration of the leak detector parameters
C 110 - Operating principle of the control panel
C 120 - Setting and maintenance part presentation of the control panel
C 130 - Access to level
4
- Password
C 140 - Summary of screens
C 200 - Starting up / Switching off the leak detector
C 210 - How to use the leak detector: 2 methods
C 211 - Operation of the leak detector
C 300 - Calibration of the leak detector
C 301 - Basic internal calibration of the leak detector
C 302 - Advanced internal calibration of the leak detector
C 303 - External calibration of the leak detector
C 304 - Correction factor
C 305 - Calibrated leak values programming
C 306 - Adaptor for calibrated leak in sniffing mode
C 400 - Remote control
C 410 - Headphone and loudspeaker
C 430 - 3 masses option
C 440 - Control panel with graphic interface
C 450 - Long distance sniffer probe and Helium spray gun
Alcatel Vacuum T echnology France - User’s Manual ASM 142/142 D - ASM GRAPH/GRAPH D/GRAPH D+
1/3