Pump
labels
Located
on the rear of the pump, this label warns the
user
against
possible risk of injury due to any hand contact with hot surfaces.
It
states
that
protective
gloves should be
used
before performing any
intervention.
Located
on the upper cover, this label indicates that due to its heavy
weight, the product should not be handled manually, but always
through appropriate handling devices.
Located
on the upper cover, this label indicates that
some
of the
internal
parts
are energized and could
cause
electrical
shocks
in case
of contact. It advizes to
disconnect
the pump before any intervention
or to properly
lock-out
and
tag-out
the
equipment
breaker before any
intervention
on the pump.
Leak detector
labels
4/6
Located
near the main power switch, this label indicates that after
disconnecting
power supply, the operator should wait 5 minutes
before working on the leak detector.
Located
near the main power switch, this label indicates that the
product has been
customized
in factory, according to
customer
order
.
Located
at the top of the frame, near the
exhaust
port, this label
indicates that the
exhaust
port should not be blocked.
To Next Page
Loading...
