Spray probe
9
Helium spray probe.
Part
No:
109951
Spray gun
Long
nozzle
Short
nozzle
5 m plastic tube
2 needles
M
1
/4NPT
M
3/8G
M
1
/8G
He
bottle
Spraying Helium in order to detect a leak is
usually
very easy,
especially if you need fast and rough detection.
Spraying Helium could also become a technical challenge when you
need to pinpoint very fine leaks, more so, when they are located in
areas with difficult access.
The
Helium spray gun is an easy to
use
and
multipurpose
tool which
allows you to work in various conditions of test:
•
Multi standard:
thanks
to the 3 different adapters to be
connected
to
the Helium bottle (M
1/4
NP
T
,
M
3/8G
and M
1
/8G).
•
Multi purpose:
thanks
to the 2 nozzle
lengths
of 80 mm
/
3.14 inch
and 290 mm
/
14.4 inch.
•
Standard leak mode: for quick and rough leak tests.
•
Fine
leak mode.
The
Helium spray gun is provided with 2 standard
needles
wich
allow
the
adjustment
of the Helium flow at the outlet of the nozzle.
Inlet adaptor
10
Adaptator plug is
necessary
to
connect
the calibrated leak to the inlet
part
(test
chamber) of the detector.
Part
No:
067791
Printer
11
The manufacturer
does not supply the printers.
The
printer should be
connected
to the leak
detector
and have the following characteristics:
-
RS
232
serial type
-
40
columns
minimum.
8
/
14
To Next Page
Loading...
