Adixen ASM GRAPH D+ - Page 335

G 800
T ools
GB 03847 -
Edition
01 -
June
08
ASM Dialogue
software
(ctd)
Use
1 -
Set the communication parameters
ASM Dialogue
communication parameters set are the same as the
leak
detector communication parameters defined in the RS 232 User's
Manual (chapter C).
If you change leak
detector values ("Baud rate " for example), you
must change also the ASM Dialogue values.
2 - Set the T er minal parameters
Optional.
3 - Define Function keys
Optional.
^M=
C
R
5/6