Adixen ASM GRAPH D+ - Page 88

Operation
C
ASM GRAPH - ASM GRAPH D
2 /4
GB 00219 -
Edition
04 -
June
08
ASM 142 - ASM 142 D
ASM GRAPH D+ User ’ s Manual
Detailed contents
C 210 How to use the leak detector: 2 methods
- How to use your leak detector?
- Hard vacuum test mode
- Sniffing test mode
C 211 Operation of the leak detector
- Hard vacuum test
- Sniffing test
- Sniffer probe clogged reject point
- Adjust vacuum/sniffing alarm reject point
C 300 Calibration of the leak detector
C 301 Basic internal calibration of the leak detector
- Purpose of the internal calibration
- When should an internal calibration be performed?
- Internal calibrated leak
- Internal calibration with the internal He calibrated leak
- Internal calibration with an external calibrated leak
C 302 Advanced internal calibration of the leak detector
- Introduction
- Activation/deactivation of the internal calibration
- Checking function
C 303 External calibration of the leak detector
- Purpose of the external calibration
- External calibrated leak
- Digital and analog display
- External calibration procedure
- Checking function with an external calibrated leak
C 304 Correction factor
- Definition
- Activate/Deactivate the correction factor VACUUM/SNIF COR Adjustment
- General notes (vacuum or sniffing test mode)
C 305 Calibrated leak values programming
- Different types of calibrated leaks
- Programming the calibrated leak parameters