Section 4 User Interface Guide Total Access 600R System Manual
110 © 2002 ADTRAN, Inc. 61200600L1-1A
#
Indicates the entry number in the In Exceptions table.
ACTIVE
Turns this entry active when set to YES. Default is NO.
T
YPE
Selects the filter define list to reference (default is MAC):
MAC
from the SECURITY/FILTERS/FILTER DEFINES/MAC FILTER
D
EFINES list.
PATTERN
from the SECURITY/FILTERS/FILTER DEFINES/PATTERN FILTER
D
EFINES list.
IP
from the SECURITY/FILTERS/FILTER DEFINES/IP FILTER DEFINES
list.
FILTER LIST NAME
Selects between filters defined in the list. Default is no entry in filter list name.
NEXT OPER
The next operation to use to combine with the next filter in the list (default is END):
END
the last filter to combination.
AND
logically AND this filter with the next filter in the list.
OR
logically OR this filter with the next filter in the list.
OUT TO VC
The packets which come from the unit to the WAN can be filtered in three ways: