Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 111
DISABLE (DEF)
Turns off packet output filtering. No outgoing packets are
blocked.
BLOCK ALL
All outgoing packets to the WAN are blocked except as defined
in the
SECURITY > FILTERS > INTERFACES > SETUP > OUT
E
XCEPTIONS list.
FORWARD ALL
No outgoing packets to the WAN are blocked except as defined
in the
SECURITY > FILTERS > INTERFACES > SETUP > OUT
E
XCEPTIONS list.
OUT EXCEPTIONS
This is a list of up to 32 filter entries which can be combined using the operations field. The
operations are performed in the order they appear on the list.
#
Indicates the entry number in the In Exceptions table.
ACTIVE
Turns this entry active when set to YES. Default is NO.
T
YPE
Selects the filter define list to reference (default is MAC):
MAC
from the SECURITY > FILTERS > FILTER DEFINES > MAC FILTER
D
EFINES list.
PATTERN
from the SECURITY > FILTERS > FILTER DEFINES > PATTERN
F
ILTER DEFINES list.
IP
from the SECURITY > FILTERS > FILTER DEFINES > IP FILTER
D
EFINES list.
FILTER LIST NAME
Selects between filters defined in the list. Default is no entry in filter list name.
NEXT OPER
The next operation to use to combine with the next filter in the list (default is END):