61200600L1-1A © 2002 ADTRAN, Inc. 147
Total Access 600R System Manual Section 5 DLP-006
11. Press <Ctrl + L> to log out of the unit.
12. From a remote computer system connected to the LAN, Telnet to the unit.
The following screen will appear.
13. Enter the user name assigned in Step 7 and press <Enter>.
The following screen will appear.
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX
allow a Telnet to be performed by simply typing Telnet <IP Address> at a command line
prompt. Telnet is a utility common on many local area networks that allows remote access
to another computer or piece of equipment.
To Next Page
Loading...
