148 © 2002 ADTRAN, Inc. 61200600L1-1A
Section 5 DLP-006 Total Access 600R System Manual
14. Enter the password assigned in Step 7.
Upon entering the correct password, the unit’s Main Menu is displayed as shown below:
You are now Telnetted into the unit’s menu system.
15. When you complete your configuration changes and save the changes (when prompted), press
<Ctrl+L> to log out and close the session.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
To Next Page
Loading...
