154 © 2002 ADTRAN, Inc. 61200600L1-1A
Section 5 DLP-008 Total Access 600R System Manual
DLP-008
For LAN Upgrades
1. Connect to the unit using the 10/100BASET interface.
If you are not already connected to the unit’s 10/100BASET port using Telnet client software, use the
procedure in DLP-006, Telnetting to the Unit, to connect to the unit.
2. Verify the TFTP server is running on the network. The user may ping the TFTP server from the unit to
verify communication.
3. Download the firmware upgrade file to your computer.
4. Go to the S
YSTEM UTILITY menu and select the UPDATE FIRMWARE menu; press <Enter>.
5. Go to the T
RANSFER METHOD menu and select TFTP.
6. Set the TFTP S
ERVER ADDRESS to the IP address of the machine running the TFTP server program.
7. Enter the filename of the update file into the TFTP S
ERVER FILENAME field.
8. Select S
TART TRANSFER to start the update. Enter Y to confirm the upgrade.
Perform Steps Below in the Order Listed
A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose
S
TART>PROGRAMS>ADTRAN UTILITIES>TFTP SERVER to start the server.
If using ADTRAN utilities, save the upgrade file to the “ADTNUTIL” directory on your
hard drive.
If using ADTRAN utilities, this will be the IP address that appears in the TFTP SERVER
S
TATUS window.
To Next Page
Loading...
Need help?
General
