3-161
2023 emulation
This instrument can be configured easily (page 3-133) to respond to many commands originally
written for 2023 Series AM/FM signal generators (2023, 2024, 2023A, 2023B and 2025). The
following is a list of 2023 Series commands that are emulated by 3410 Series instruments. For
details of the commands, refer to the appropriate operating manual: part no. 46882/225 for 2023
and 2024; part no. 46882/373 for 2023A, 2023B and 2025.
Note: Status reporting is returned in 2023 format.
Common commands and * commands are as standard 2023 Series.
*RST resets the instrument to 2023 Series defaults.
BLANK
CONTRAST
ELAPSED?
ELAPSED:RESET
ERASE:ALL
ERROR?
FSTD
GPIB
KLOCK
KUNLOCK
OPER?
POWUP:MEM
POWUP:MODE
RCL?
RCL:DN
RCL:MEM
RCL:UP
AM[:DEPTH]
AM:Dn
AM:EXTAC
AM:EXTDC
AM:Inc
AM:INT
AM:MODF:Dn
AM:MODF:Inc
AM:MODF:PHASE
AM:MODF:Retn
AM:MODF:SIN
AM:MODF:SQR
AM:MODF:TRI
AM:MODF:Up
AM:MODF[:VALUE]
AM:MODF:Xfer
AM:OFF
AM:ON
AM:Retn
AM:Up
AM:Xfer
AM2[:DEPTH]
AM2:Dn
AM2:EXTAC
AM2:EXTDC
AM2:Inc
AM2:INT
AM2:MODF:Dn
AM2:MODF:Inc
AM2:MODF:PHASE
AM2:MODF:Retn
AM2:MODF:SIN
AM2:MODF:SQR
AM2:MODF:TRI
AM2:MODF:Up
AM2:MODF[:VALUE]
AM2:MODF:Xfer
AM2:OFF
AM2:ON
AM2:Retn
AM2:Up
AM2:Xfer