Aeroflex 3412 - Power Commands

4-147
Power commands
([SOURce]:POWer subsystem)
ALC, carrier level, carrier level sweeping, level steps, offsets, max. RF level
Commands for:
• Configuring the ALC’s bandwidth and state
• Setting carrier level and step size
• Setting compensation for external losses (offsets)
• Setting an RF output limit
• Setting sweep parameters.
[SOURce]
:POWer
:ALC
:BW\?
:FROZen
:[MODE]\?
:SEARch
[:STATe]\?
[:LEVel]
[:IMMediate]
[:AMPLitude]\?
:OFFSet
:ATTenuation\?
[:GAIN]\?
:LOSS\?
:STATe\?
:STEP
[:INCRement]\?
:LIMit
[:AMPLitude]\?
:MODE\?
:OPTimisation\?
:QRFNull
:SWEep
:DWELl\?
:MANual\?
:STARt\?
:STEP\?
:STOP\?