LOCAL OPERATION CARRIER FREQUENCY
SIG
GEN
B5353
...
B5789
3-22
Carr Freq FREQ page 4-34
You can enter a carrier frequency in the range
250 kHz–2 GHz 3412
250 kHz–3 GHz 3413
250 kHz–4 GHz 3414
250 kHz–6 GHz 3416
to a resolution of 1 Hz. Press the appropriate units key to terminate.
Φ
N Optimised FREQ:PHAS:OPT page 4-36
You can choose the most suitable phase noise performance:
>10 kHz optimizes the phase noise more than 10 kHz away from the carrier frequency.
Gives slower settling of the synthesizer.
<10 kHz optimizes the phase noise less than 10 kHz away from the carrier frequency.
Gives faster settling of the synthesizer.
Gives fast switching speed during list mode operation.
The RF ON/OFF key
OUTP page 4-25
Switch the carrier ON or OFF at any time using
RF
ON/OFF
.
This turns the RF output on and off, whilst retaining the 50 Ω output impedance.
To Next Page
Loading...
