REMOTE OPERATION OUTPUT COMMANDS
4-25
OUTPut[:POWer][:STATe]
Description: Turns the RF output on or off. This is the ‘final’ switch before the RF OUTPUT socket,
and has no effect on the configuration of modulation paths within the instrument.
Corresponds to the RF ON/OFF key.
Parameters: <Boolean>
Valid values: OFF | ON | 0 | 1
*RST sets: OFF
OUTPut[:POWer][:STATe]?
Description: Queries whether the RF output is on (1) or off (0).
Parameters: None
Response: <Boolean>
Returned values: 0 | 1
To Next Page
Loading...
