Aeroflex 3412 - Phase Modulation Commands

4-133
Phase modulation commands
([SOURce][:MODulation]:PM subsystem)
Phase modulation deviation, source, frequency, waveshape, mod. sweep,
phase, input parameters
Commands for:
• Setting phase modulation frequency and frequency step size
• Setting phase modulation deviation and deviation step size
• Setting phase modulation impedance and sensitivity
• Setting phase modulation mode (fixed or sweep)
• Setting phase modulation waveshape and time per sweep
• Setting phase modulation sweep parameters
• Setting internal/external source on/off
• Setting phase relationship of PM2 with respect to PM1.