Aeroflex 3412 - Page 258

REMOTE OPERATION LIST COMMANDS
4-47
[SOURce]:LIST:TRIGger:SLOPe
Description: Sets the polarity of the external trigger.
Parameters: <CPD>
Valid values: POSitive | NEGative
*RST sets: POS
[SOURce]:LIST:TRIGger:SLOPe?
Description: Queries the polarity of the external trigger.
Parameters: None
Response: <CRD>
Returned values: POS | NEG
[SOURce]:LIST:VALue
Description: Modifies the frequency and power values at the specified address.
Parameters: <NRf>,<NRf>,<NRf>
Valid values: <addr>,<freq>,<power>
[SOURce]:LIST:VALue?
Description: Returns the frequency and power values at the specified address.
Parameters: None
Response: <NR1>,<NR2>,<NR2>
Returned values: Address and the associated frequency and power values