REMOTE OPERATION AM COMMANDS
4-51
[SOURce][:MODulation]:AM[1]|2[:DEPTh]
Description: Sets the AM depth as a percentage.
Parameters: <numeric_value>
Valid values: <NRf>(PCT) | MAXimum | MINimum | UP | DOWN | RETurn | REFerence
Set by value, to maximum or minimum, stepping up or down, returning to the last full
setting, or setting the current value to the last full setting.
*RST sets: MIN
[SOURce][:MODulation]:AM[1]|2[:DEPTh]?
Description: Queries the AM depth.
Parameters: None
Response: <NR2>
Returned values: AM depth as a percentage
[SOURce][:MODulation]:AM[1]|2[:DEPTh]:STEP[:INCRement]
Description: Sets the AM depth step size as a percentage.
Parameters: <numeric_value>
Valid values: <NRf>(PCT) | MAXimum | MINimum
*RST sets: 1 PCT
[SOURce][:MODulation]:AM[1]|2[:DEPTh]:STEP[:INCRement]?
Description: Queries the AM depth step size.
Parameters: None
Response: <NR2>
Returned values: AM depth step size as a percentage
To Next Page
Loading...
