Aeroflex 3412 - Page 352

REMOTE OPERATION PM COMMANDS
4-144
[SOURce][:MODulation]:PM2:INTernal:PHASe:SENSitivity
Description: Selects the sensitivity of the rotary control or
x10
and
10

keys when setting up the
phase offset of PM2 relative to PM1.
Parameters: <CPD>
Valid values: FINe (0.01º resolution)
MEDium (0.1º resolution)
COARse (1.0º resolution)
*RST sets: FINe
[SOURce][:MODulation]:PM2:INTernal:PHASe:SENSitivity?
Description: Queries the sensitivity of the rotary control or
x10
and
10

keys when setting up the
phase offset of PM2 relative to PM1.
Parameters: None
Response: <CRD>
Returned values: FIN | MED | COAR