Oscilloscope Utility Settings 6
Agilent 1000B Series Oscilloscopes User’s Guide 141
To export/import masks
1 Because you can only export and import masks from an external drive,
select the External mask location. See “To select internal/external mask
storage location” on page 140.
2 In the Mask menu ([Utility] > Mask Test > MaskSetting), press Imp./Exp..
3 Use the Disk Manager to select the file and import or export the mask.
See “Using the Disk Manager” on page 122.
When importing a mask while the Location is Internal or when importing or recalling a
mask while the Location is External, the mask is imported or recalled to internal memory.
To activate the mask, you must set the Location to Internal, then Recall from internal
memory.
To Next Page
Loading...
Need help?
General
