Agilent Technologies 1000B Series User Manual

1Getting Started
22 Agilent 1000B Series Oscilloscopes User’s Guide
Step 3. Load the default oscilloscope setup
You can recall the factory default setup any time you want to return the
oscilloscope to its original setup.
1 Press the front panel [Default Setup] key.
2 When the Default menu appears, press [Menu On/Off] to turn off the
menu.
(The Undo softkey in the Default menu lets you cancel the default setup
and go back to the previous setup.)
Figure 2 [Default Setup] Key

Agilent Technologies 1000B Series Specifications

General

Brand	Agilent Technologies
Model	1000B Series
Category	Test Equipment
Language	English