Agilent Technologies 1000B Series User Manual

Getting Started 1
Agilent 1000B Series Oscilloscopes User’s Guide 23
Step 4. Input a waveform
1 Input a waveform to a channel of the oscilloscope.
Use one of the supplied passive probes to input the Probe Comp signal
from the front panel of the oscilloscope.
CAUTION
To avoid damage to the oscilloscope, make sure that the input voltage at the BNC
connector does not exceed the maximum voltage (300 Vrms, CAT I).

Agilent Technologies 1000B Series Specifications

General

Brand	Agilent Technologies
Model	1000B Series
Category	Test Equipment
Language	English