Agilent Technologies 1000B Series - Adjusting the Trigger Level; To Adjust the Trigger Level; Figure 34 Trigger Controls

Capturing Data 3
Agilent 1000B Series Oscilloscopes User’s Guide 85
Adjusting the Trigger Level
To adjust the trigger level
• Turn the trigger [Level] knob.
Two things happen:
• The trigger level value is displayed at the lower left- hand corner of
the screen.
• A line is displayed showing the location of the trigger level with
respect to the waveform (except when using AC coupling or LF reject
coupling modes).
• Push the trigger [Level] knob to set the level at 50% of the signal’s
vertical amplitude.
Figure 34 Trigger Controls
Trigger level knob