1Getting Started
18 Agilent 1000B Series Oscilloscopes User’s Guide
Step 1. Inspect the package contents
1 Inspect the shipping container for damage.
Keep a damaged shipping container or cushioning material until you
have inspected the contents of the shipment for completeness and have
checked the oscilloscope mechanically and electrically.
2 Verify that you received the following items in the oscilloscope
packaging:
• Oscilloscope.
• Power cord.
• N2862A 10:1 10 MΩ passive probes, quantity = 2.
• Documentation CD.
• Front panel overlay (if language option other than English is chosen).
If anything is missing, or if you need to order additional probes, power
cords, etc., contact your nearest Agilent Technologies sales office.
3 Inspect the oscilloscope.
• If there is mechanical damage or a defect, or if the oscilloscope does
not operate properly or does not pass performance tests, notify your
Agilent Technologies sales office.
• If the shipping container is damaged, or the cushioning materials
show signs of stress, notify the carrier; then, contact your nearest
Agilent Technologies sales office.
Keep the shipping materials for the carrier’s inspection.
The Agilent Technologies sales office will arrange for repair or
replacement at Agilent’s option without waiting for claim settlement.
To Next Page
Loading...
Need help?
General
