Displaying Data 2
Agilent 1000B Series Oscilloscopes User’s Guide 49
To specify a bandwidth limit
When high frequency components of a waveform are not important to its
analysis, the bandwidth limit control can be used to reject frequencies
above 20 MHz. See Figure 19 and Figure 18.
1 If the channel’s menu is not currently displayed, press the channel key
([1], [2], [3], or [4]).
2 In the Channel menu, press BW Limit to toggle the bandwidth limit
setting “ON” and “OFF”.
Figure 18 BW Limit Control OFF
Bandwidth limit OFF
To Next Page
Loading...
